Rock Shox suspension fork All Travel Spacer Boxxer Race

Forks with Dual Air and some older or cheaper Solo Air forks are grazed with spacers.

The spacers prevent the fork from completely springing out - more spacers = less suspension travel. This simple principle works with all Dual Air forks and Solo Air forks, where pressure equalization takes place via a valve in the main piston. This construction is found on older and cheaper forks.

To insert or remove spacers, the lower part must be removed from the uprights and the Lutffedereinheit removed from the standpipe. When assembling the fork must of course be re-lubricated. We are happy to help you with the right lubricant and quantities for your fork.

Incidentally, the fork length changes by the same amount as the travel - 1cm more spacer means 1cm less travel and 1cm less installation height, etc ..

The air chamber size is reduced by more spacers, so that the characteristic remains approximately the same. The addition of tokens is therefore not necessary (and mostly not possible with these forks).

• travel adjustment
• Installation requires partial disassembly and relubrication of the fork

Please direct yourself in compatibility issues only after the manufacturer number, not after the possibly incomplete or too general article designations!

Unfortunately we can not keep up with more than 4000 Rock Shox spare parts if a single spare part is suddenly compatible with another fork or that a spare part "for Reba" just fits for the first series and not one of the two later ones.

Contact us at info@hibike.de for your questions about Rock Shox parts - we also have a large collection of current and older parts catalogs, oil level documents and service manuals. To identify your fork or damper, it's best to send meaningful photos. Due to the time required we can offer this service only by email and not by phone.

• 1 x Rock Shox All Travel Spacer (see item description for details)