Praxis Works M30-THRU bottom bracket

BSA 68 / 73mm

Bottom bracket for mounting Praxis Works cranks with M30THRU aluminum axles, such as. the Lyft Carbon, in a frame with 68 / 73mm BSA housing.

30mm drive side bearing / 30mm non-drive side bearing - therefore also suitable for RaceFace / Easton "Cinch" or Rotor "Rex / 3D +" cranks. Compatible with ISCG05 chain guides (ISCG03 not compatible).

Installation instructions: a Praxis Works M30 tool is required to screw in (not included).

The Praxis Works M30 BB Tool (TP-0030) and a 3/8 inch torque wrench are required for assembly.

Press-Fit BB86 Road / BB90 / 92

Bottom bracket for mounting Praxis Works cranks with M30THRU aluminum axles, such as. the Lyft Carbon, in a frame with 89.5 / 92 x 41mm housing (not compatible with Trek BB90 housings).

30mm drive side bearing / 30mm non-drive side bearing - therefore also suitable for RaceFace / Easton "Cinch" or Rotor "Rex / 3D +" cranks.

A press tool (e.g. Park Tool HHP-2 or HHP-3) is required for assembly.

BB30 / PF30 73mm

Bottom bracket for mounting Praxis Works cranks with M30THRU aluminum axles, such as. the Lyft Carbon, in MTB frame with 73 mm BB30 / PF30 housing.

It has the patented Praxis Works Rubber-Collet Ring: this compensates for tolerances in the housing, additionally clamps the bearing and thus ensures a creak-free and creak-free fit.

The built-in ball bearings from Enduro Bearings ensure smooth running and reliability.

30mm drive side bearing / 30mm non-drive side bearing - therefore also suitable for RaceFace / Easton "Cinch" or Rotor "Rex / 3D +" cranks.

Two Praxis Works M30 BB tools and a press tool (e.g. Park Tool HHP-2 or HHP-3) are required for assembly.

M30THRU MTB bottom bracket 68 / 73mm external T47

Bottom bracket for mounting Praxis Works cranks with M30THRU aluminum axle in frames with T47 EB (external bearing) housing.

Also suitable for cranks from many other manufacturers, such as RaceFace / Easton "Cinch", CaneCreek or Rotor "Rex / 3D +", which have 30mm drive side / 30mm non-drive side bearing.

• 1 x Praxis Works M30THRU MTB bottom bracket (see item description for details)

Bottom bracket for mounting Praxis Works cranks with M30THRU aluminum axle in frames with BB386 EVO housing. Also suitable for cranks from many other manufacturers, such as RaceFace / Easton "Cinch", CaneCreek or Rotor "Rex / 3D +", which have 30mm drive side / 30mm non-drive side bearing.

• For 386EVO racing bike cranks and Press Fit 386EVO racing bike frames with a width of 86.5 mm
• 30mm Drive / 30mm NonDrive |
• Steel cartridge chamber
• Also suitable for cranks with a 30 mm axle from SRAM / RaceFace / Easton "Cinch" / Rotor Rex, 3D + cranks and CaneCreek

• 1 x Praxis Works M30THRU Road bottom bracket (see item description for details)