SwissStop disc brake pads 32 EXOTHERM2

• Heat tolerance: 10/10
• Longevity: 9/10
• Dosability: 9/10
• Compatible with
  SRAM: Red eTap AXS (Gen. 1 'Mono-Bloc' caliper) / eTap HRD / Red 22 HRD (B1) / Force 22 HRD (B1) / Force 1 HRD / Rival 22 HRD (B1) / Rival 1 HRD / Apex 1 HRD / S-700 HRD (B1) / Level Ultimate / TLM (2016-2019)

Caution: The brake pads must be run in to achieve optimal braking power and durability

Step 1: On a descent of medium steepness, let the front and rear brakes slide alternately for 20-30 seconds.

Repeat this process 2-3 times.

Step 2: On a steep descent, let both brakes slip alternately for 10-15 seconds each and end the braking with an almost complete stop.

Repeat this process 2-3 times.

Pro-Tip: Run in the brake pads for the rear brake on the front wheel. Exactly as described above. Then mount the pads at the rear. Let it sand briefly 2-3 times on a level road surface. Caution: Before replacing the pads, make sure they cool down sufficiently: risk of burns!

Maximum service life of the coverings
Extremely long-lasting and high-performance lining mixture that is cooled by an aluminum carrier plate with cooling fins: the service life of all components is maximized.

Minimal brake fading
The cooling fins reduce the temperature in the pistons, pads and discs: brake fading is minimized.

• 1 pair of SwissStop Disc 32 EXOtherm2 brake pads (see item description for details)