Busch & Müller E-Werk charger

Powerful, dynamo-powered universal charger

For all those who do not want to miss the use of their mobile phones, GPS receivers, MP3 players and other electronic devices while cycling or have no stationary charging station on the go, there is the new "bicycle-mobile" E-WERK.

If you connect the compact device to the hub dynamo, the power generated by the cyclist's power is no longer used exclusively for the lighting system, but can alternatively be implemented in the E-WERK. The energy is delivered via the two enclosed connecting cables, to which the inventor can individually connect the plug required for his application. Or the user uses the included USB cable - the standard connection of choice, which offers compatibility with a wide range of products - and ensures that no device has to go out of steam on the go. With a pin attached to the underside of the device, voltage (2.8 to 13.3 V) and current (0.1 to 1.5 A) can be set variably and quickly for all standard applications using two rotary knobs.

The E-WERK provides up to 16 W and that at idle losses of only 0.03 W at 30 km / h! Even at a speed of 15 km / h, E-WERK charges as fast as a standard mains charger. An extension cable ensures that the power can be tapped practically anywhere on the bike. Cable glands securely hold the connections on the E-WERK waterproof. Rubber rings in three different sizes and also cable ties are included for the installation of the "power plant in miniature format" at various points of the bicycle.

By the way: The universal cockpit holder, which is also available from Busch & Müller, is the ideal accessory for the E-WERK, as this adapter ensures that all connected devices can be securely fastened to the handlebars in the cyclist's field of vision.

Highlights

• Connected to the hub dynamo, the "Bicycle Mobile" E-WERK provides electrical power for a variety of applications
• Voltage (up to 13.3 V) and current (up to 1.5 A) can be set in small steps, so that all common mobile phones, navigation devices, radios, etc. can be supplied while driving or rechargeable batteries can be charged without unintentionally high charging currents or cause damage
• negligible open circuit losses (only 0.03 W at 30km / h)
• The connection is made using a cable with a USB socket, another with a mini USB plug, one with a microUSB plug and two cables that can be freely assembled
• Extension cable is included
• practical and safe installation with rubber rings or with cable ties
• The ideal accessory is the Universal Cockpit Holder, which holds the devices operated by the E-WERK and holds them on the handlebars

delivery

• 1x Busch & Müller E-Werk universal charger for hub dynamo
• 1x cable with USB socket
• 1x mini USB plug
• 1x microUSB connector
• 2x cables to be assembled
• mounting material